| 1. |
CHEMICAL
PRODUCT AND COMPANY IDENTIFICATION
Issue
Date: 05/10/2006
DISTRIBUTED
IN PHILIPPINES BY:
E-Hsing Corporation
3000 Aurora Blvd. (Tramo) Pasay City
Telephone Numbers: 853-1812, 853-5528
Fax Number: 852-9431
E-mail: ehsingcorp@hotmail.com
Web: www.castlewaterproof.com
Not classified as Hazardous and not Dangerous Goods
according to the JIS Code
| UN
NO: |
Non
allocated |
D.G.
Class: |
Nonhazardous |
Pack.
Group: |
Non
allocated |
| HAZCHEM: |
Non
allocated |
SUB.
Risk: |
Non
allocated |
SUSDP: |
Non
allocated |
PROPER
SHIPPING NAME: CASTLE WATERPROOF
PRODUCT
USE: Waterproofing Film |
| |
|
| 2. |
COMPOSITION / INFORMATION ON INGREDIENTS
Component:
Non Hazardous Ingredients
CAS no. 24937-79-8 = Ethylene- Vinyl Acetate Copolymer
50%
CAS no. 471-34-1 = CACO3 (powder) 30%
CAS no. 7732-18-5 = H20(water) 20%
Additives not required
|
| |
|
| 3. |
HAZARDS
IDENTIFICATION
Not
hazardous in any nrmal use |
|
|
| 4. |
FIRST
AID MEASURES
Eyes:
Immediately flush with water for 15 minutes. Get medical
advice if irritation develops or persists.
Skin:
non-contaminated
Inhalation:
Remove to fresh air. If not breathing, give artificial
respiration, preferable mouth to mouth. If breathing
is laboured, give oxygen and consult a physician immediately.
Ingestion:
Consult a physician immediately. If vomiting occurs,
aspiration into the lungs may cause lung damage. Never
give anything by mouth to an unconscious person.
|
| |
|
| 5. |
FIRE
FLIGHTING MEASURES
| Flash
Point |
:
Not Applicable |
| Auto-ignition
Temperature |
:
No data available |
| Lower
Exposive Limit |
:
No data available |
| Upper
Explosive Limit |
:
No data available |
Suitable
Extinguishing Media: Use as appropriate for surrounding
fire.
Protective
Equipment for Fire Fighting: Wear self-contained
breathing apparatus and protective clothing to prevent
contact with eyes.
Unusual
Fire and Explosion Hazards: The product is not
flammable.
|
| |
|
| 6. |
ACCIDENTAL
RELEASE MEASURES
Caution:
Non slippery. Eliminate all sources of ignition. Provide
sufficient ventilation. Wear appropriate personal
protective equipment safety glasses. Do not breathe
vapour. Contain spill. Use non-sparking tools and
equipment. Fill into suitable containers for disposal.
Dispose of empty containers in accordance with federal,
state and local laws.
|
| |
|
| 7. |
HANDLING
AND STORAGE
Handling:
Observe normal standards of industrial hygiene
for handling chemicals. Use in a well ventilated area.
Avoid breathing vapour and contact with eyes Wear
eye protection. A sensitised person should not be
exposed to the product.
Storage:
Store in tightly sealed containers to protect from
atmospheric moisture. Store in a cool and dry area.
Keep away from ignition sources such as fire, flame
and sparks.
Empty
container warning: Do not reuse empty drums or
containers unless professionally cleaned. Do not cut,
drill, grind or weld on or near empty containers.
Other
Precautions: Do not eat, drink or smoke when using
the product.
|
| |
|
| 8. |
EXPOSURE
CONTROLS / PERSONAL PROTECTION
Exposure
Limit Information
NOHSC1
TWA STEEL
Component (k/cm2) (mg/m2)
Acrylic polymer -a-
Inorganic extender - 10b-
Additives - a-
Water -a-
A = not listed
B = as nuisance dust
TWA - Time Weighted Average
STEL = Short Term Exposure Limit
National
Occupational Health and Safety Commission (Japan)
Respiratory
Protection: None Required if airborne concentrations
are maintained below the exposure limit listed in
"Exposure Limit Information"
Eye
Protection: Use chemical splash goggles or approved
equivalent. Eye protection worn must be compatible
with respiratory protection system employed. An eye
wash station and safety shower should be available
in the work area.
Hand
Protection: No available data
Protective
Clothing: Proper working clothes
Engineering
Controls (Ventilation): Use Local exhaust ventilation
sufficient to maintain exposure levels below exposure
limit concentrations.
|
| |
|
| 9. |
PHYSICAL
AND CHEMICAL PROPERTIES
| Appearance
and colour |
:
Cream-colored ropy liquid |
| Adhesion
to surface |
:
18kg/cm2 (JIS.K6848) |
| Pulling-resistant
force |
:
29kg/cm2 (JIS.K6301) |
| Tensibility
ratio |
:
Above 450%(JIS.K6301) |
| Permeability
Test |
:
13.7 mg/cm2 (JIS.Z0208) |
| Main
Content |
:
Multi-copolymerized resin |
| Odour
Characteristic |
:
Mild Acrylic |
| ph |
:
5-6 |
| Proportion |
:
1.2 |
| Electric
Charge |
:
None |
| Vapour
Pressure |
:
No data available |
| Melting
Point |
:
~0 Degree Celcius |
| Boiling
Point |
:
~100 Degree Celcius |
| Solubility
in Water |
:
Dispersible |
| M.F.T. |
:
1.2-2.0g/m |
|
| |
|
| 10. |
STABILTY
AND REACTIVITY
Considered
stable under normal conditions of use and handling.
Non-Hazardous decomposition products.
|
| |
|
| 11. |
TOXICOLOGICAL
INFORMATION
No Data available for the product.
|
| |
|
| 12. |
ECOLOGICAL
INFORMATION
No
available data.
|
| |
|
| 13. |
DISPOSAL
CONSIDRATIONS
Dispose
of waste and empty containers in accordance with federal,
state and local laws. |
| |
|
| 14. |
TRANSPORT INFORMATION
Not
classified as Dangerous Goods according to the JAPAN
code for the Transport of Dangerous.
|
| |
|
| 15. |
REGULATORY
INORMATION
No
Avialable Data
|
E-Hsing Corp Has submitted a sample descirption of Castle Water Proofing ( PME - 202) to Intertek Testing Services Philippines, Inc. last October 7, 2008 and has passed under the following results.
Test Conducted: As requested by the Applicant Refer to page two for details.
HTCO1-1. TOXIC ELEMENTS ANALYSIS:
(Wish reference to European Standard on Safety of Toys EN 71 Part 3: 1004. Soluble Toxic Elements were determined by Atomic Absorption Spectrophotometric Analysis)
