|
PME
- 901 (Primer)
CASTLE
PME-901 clogs micro pores of concrete surfaces. Has
strong cementing power to concrete with high-solid
content. It saves your time. PME-901 is non-toxic
and non-flammable.
Can be use to all concrete surfaces.
|
Primer,
Cement and
Mortar Intensifier
|
Features
and Benefits
|
•
|
Clogs
Micropores of Concrete Surface |
|
•
|
Strong
Cementing Power to Concrete |
|
•
|
High-Solid
Content Saves You Time |
|
•
|
Non-Toxic
and Non-Flammable |
Coverage
|
•
|
1
gallon of PME 901 = 25 - 35 sqm (single
coat only) |
Shelf-Life
• |
Opened
and stored in original
container - 36 months |
• |
Sealed
- Indefinite |
|
Suitable
For
Cleaning
|
•
|
Clean
all brushes, rollers and trays with clean
water after every use |
Health
and Safety
|
•
|
In
case of eye splashes or excessive skin contact,
thoroughly flush with water. |
|
|
|
Application
Procedure
PME-901
(Primer, Cement and Mortar Intensifier)
|
Mixture
as Primer |
:1
gallon of PME-901 mix w/ 150% of water. Stir
throughly. Apply by brush or roller. |
|
Mixture
as Mortar Intensifier |
: 1kg.
(5%) PME 901+ 2.5kg (12.5%) Water + 4kg
(21%) Cement +
12kg (61.5%) Standard sand |
|
•
|
Clean
the area to be waterproof. Removed all traces
of water, dirt, protruding materials, and
other contaminants. |
|
•
|
Areas
to receive waterproofing should be dried
prior to priming. |
|
•
|
Application
of PME 901(primer, for concrete application
only) as primer, by paint brush or roller
brush. Drying time would take 30-40mins.,
depending on the condition of the surface
before applying the 1st coat of PME 202(waterproofing
film). |
|
•
|
Flood
testing after the application of waterproofing. |
|
|
