E-Hsing Corporation - Castle Premium Waterproofing

PRODUCTS: PME-202 I PME-901 I PME-995

PME - 202 (Top Coat)

Castle PME-202 is 100%waterproof. It has excellent flexibility and strong cementing power with high-solid content that saves your time. It is also alkaline resistance, non-toxic and non-flammable. Can be used in all surfaces that needs to be waterproof.

Premium
Waterproofing

Features and Benefits

•	100% Waterproof
•	Excellent Flexibility
•	Strong Cementing Power to Concrete
•	High-Solid Content Saves You Time
•	Non-Toxic and Non-Flammable
•	Alkali Resistance

Coverage

•	20 Kg / 1 Pail = 20 - 30 SQM
•	4 Kg / 1 Gal. = 4 - 6 SQM
•	2 to 3 Coats at Film Thickness of 1.0 mm to 1.2 mm

Shelf-Life

•	Opened and stored in original container - 36 months
•	Sealed - Indefinite

Application Procedure

Suitable For

•	G.I. Roofing and Gutters
•	Concrete Firewalls and Basement
•	Concrete Roof Decks
•	Toilet and Bath
•	Kitchen
•	Swimming Pools and Fish Ponds
•	Overhead Water Tanks (Aluminum and Steel)
•	Concrete and Metal Cistern Tanks
•	Sewerage Lines and Pipes
•	Wood and Aluminum Panels
•	Fiber Glass and Plant Boxes

PME-202 (Multi-High Quality Waterproofing) Can also mix with acryl paint for desired color (Minimal amount only)

Mixture	1 gallon / 1 pail PME-202 add amount of water enough to make a mixture, stir throughly. Repeat as needed. Apply by brush or roller.

	For Concrete Surface: Apply PME 901 (Primer) first before applying PME 202 (Top Coat)

Area Description	Coverage / Gallon	Coating	Application
Firewall	6 sqm.	2 coats	by roller or brush
Comfort Room	5 to 6 sqm.	2 coats	by paint brush
Cistern	3 to 4 sqm.	2-3 coats	by paint brush
Swimming Pool	2 to 3 sqm.	3-4 coats	by paint brush
Roofdeck with Topping	5 to 6 sqm.	2 coats	by paint brush

•	Clean the area to be waterproof. Removed all traces of water, dirt, protruding materials, and other contaminants.
•	Areas to receive waterproofing should be dried prior to priming.
•	Application of PME 901 (primer, for concrete application only) as primer, by paint brush or roller brush. Drying time would take 30-40mins., depending on the condition of the surface before applying the 1st coat of PME 202 (waterproofing film).
•	Application of PME 202 waterproofing film by paint or roller brush. 40mins-1hr. drying time before applying the 2nd coat of PME 202.
•	Application PME202 as 2nd coat. (Application of 3rd & 4th coat if necessary or if required).
•	Flood testing after the application of waterproofing.

	CONCRETE PANEL Has a breathing capability; air can pass thru the surface of waterproofing film. PME 202, (14%) preventing it to cause any bubbling. Can be applied on buried (topping) method. It gives a life span of 10 to 15 years. CASTLE WATERPROOFING can be applied thru negative process provided not to exceed 3kg/cm2 pressure.

	WATER TANK Can be applied on the surface (floor and wall). It has 100% water resistant. Non Toxic, odorless and an environmental friendly acrylic base waterproofing film. Can be applied on close area, firewall and basement. It doesn't have foul odor. Can be applied on buried (topping) method. It gives a life span of 10 to 15 years.

	FISH POND Non Toxic, odorless and an environmental friendly acrylic base Waterproofing film. It doesn't harm creature. Has superior strength and flexibility.

	SWIMMING POOL Can be applied on the surface (floor and wall). It has 100% water resistant. Has superior strength and flexibility.

	TOILET & BATH Can be applied on the surface (floor and wall). It has 100% water resistant. Can be applied on buried (topping) method. It gives a life span of 10 to 15 years. Has a breathing capability, air can pass thru the surface of waterproofing film PME 202, (14%) preventing it to cause any bubbling

	G.I. / LONG SPAN ROOFING Castle PME-202, could be applied directly through any G.I. Sheet / Long Span roofing. No need to use fiber mesh materials. It could also be applied in text screw, overlapping, slashing and even hole in your roofing.